New floors installed right the first time – from subfloor prep through baseboards and transitions – in hardwood, tile, LVP, or laminate.
Flooring installation is one of the most visible upgrades you can make. Every scratch or uneven seam shows the moment you walk in. Home Ready Group handles all types of flooring installation for homes across the Wasatch Front. We cover hardwood, tile, vinyl plank, and laminate from demo through final trim.
Why Professional Flooring Installation Matters
New floors change the feel of your entire home. However, the material you pick only performs well on a flat, dry subfloor. Bad cuts and loose seams cause problems within months. Because our crew handles prep, install, and trim together, you get a finished floor that lasts decades.
We serve Salt Lake City, Park City, and surrounding Utah communities. Therefore, we know the local climate issues that affect floors. Dry winters cause gaps in hardwood.
Concrete slabs in Utah homes hold moisture that ruins the wrong materials. Our team plans for these conditions before the first board goes down.
Hardwood Flooring Installation Options
Solid hardwood and engineered hardwood each work well in Utah homes. Solid hardwood gets nailed to a plywood subfloor. Engineered hardwood floats, glues, or staples down over concrete or plywood. Both types add warmth and resale value to any room.
Subfloor Prep for Hardwood
Hardwood is unforgiving on an uneven base. We check flatness with a straight edge. Then we grind high spots and fill low areas with leveling compound.
We test concrete slabs for moisture with a calcium chloride moisture test recommended by the NWFA. If moisture is too high, we suggest engineered hardwood with a vapor barrier instead.
Acclimation and Layout
Hardwood needs to sit in your home for five to seven days before we install it. This lets the boards adjust to indoor humidity. Therefore, you avoid gaps in winter and buckling in summer. We also plan the layout to dodge narrow cuts at walls and stagger joints for strength.
Tile Flooring Installation for Wet Areas
Tile is the best choice for bathrooms, kitchens, and entryways. Porcelain and ceramic handle moisture well and last decades on a solid base. Tile pairs with our kitchen and bathroom work for a clean finish.
Substrate and Mortar
Tile over plywood needs cement backer board screwed and set in thinset. This creates a rigid base that prevents cracks. For concrete, we grind the surface so mortar bonds tight. Large tiles get back-buttered to remove air voids underneath.
Grout and Sealing
We pack grout lines full, clean them, and seal with a stain-resistant sealer. Darker grout hides dirt. Lighter grout makes patterns pop. Because we discuss color before we start, you get the look you want.
LVP Flooring Installation That Handles Moisture
Luxury vinyl plank has become Utah’s most popular floor choice. It is waterproof, durable, and feels good underfoot. Modern LVP mimics real wood and stone well.
Where LVP Works Best
LVP handles moisture that destroys hardwood. Basements, kitchens, bathrooms, and laundry rooms all work. Additionally, LVP performs well over radiant heat systems common in newer Utah builds. Most products use a click-lock system that floats over thin underlayment.
Subfloor Needs for LVP
LVP is thin, so bumps show through quickly. We flatten concrete with self-leveling compound. Then we repair damaged plywood before laying underlayment. Therefore, your finished floor feels smooth from wall to wall.
Laminate Flooring Installation on a Budget
Laminate offers the look of hardwood at a lower price. Modern laminate uses photo layers and textured surfaces that mimic real wood grain. However, it is not waterproof. We recommend laminate for bedrooms, living rooms, and hallways where moisture is not a concern.
Proper expansion gaps at walls prevent buckling as seasons change. We use quality underlayment to dampen sound and add cushion underfoot. Because laminate floats like LVP, our crew installs it quickly.
Transitions, Baseboards, and Trim
Transitions between rooms are where poor flooring installation shows most. We install T-moldings, reducers, and thresholds that match your floor color. We fasten all strips in place rather than relying on glue alone.
We remove baseboards before install and put them back after. If originals are damaged, we install new ones. Quarter round or shoe molding covers the expansion gap at the wall. Therefore, every edge looks clean and finished.
Demo and Old Floor Removal
Demo is part of the job. We remove carpet, old tile, vinyl sheet, and damaged hardwood. We scrape off old adhesive and haul all debris away.
You do not need to rent a dumpster or make dump runs. Because we handle demo in house, your project moves faster.
Start Your Flooring Installation Project
Home Ready Group Construction installs flooring across the Salt Lake City metro area. We measure your space, discuss options, and give a clear quote. Our scope covers demo, prep, flooring installation, and all trim work. Contact us today to get on the schedule.
It depends on the room. LVP handles kitchens, basements, and pets well. Hardwood adds resale value in living areas. Tile suits wet areas. We match the product to how you use the space.
Yes. Tear-out, disposal, and subfloor prep are part of the job. We check the subfloor for level and moisture before anything goes down.
Hardwood and some LVP need to sit in the home a few days to adjust to your humidity. Skipping this is how floors gap or buckle later, so we plan for it.
Sometimes, with LVP or laminate over a sound, flat surface. Tile and hardwood usually need the old material removed. We tell you which after we inspect.
We use a clear milestone schedule: 10% to reserve your spot, 20% at the start of work, 50% when the project reaches about 80% complete, and the final 20% at handoff. You always know what is due and when. Financing is available if you would rather spread the cost.
Have a question we did not cover here? Read our full FAQ.
Your project in Utah
Let’s discuss your project. We respond within 48 hours. Prefer to talk now? Call (385) 515-6688.