Faucets, garbage disposals, shut-off valves, and fixture connections done leak-free
Professional faucet installation keeps your kitchen and bath running without leaks. Home Ready Group serves Salt Lake City and the Wasatch Front with solid plumbing work. We handle every type of faucet installation so you get lasting results the first time. Our team also hooks up disposals, shut-off valves, and water heater lines.
Why Faucet Installation Matters for Your Home
A worn-out faucet wastes water and drives up your bill. Leaks under the sink damage cabinets and flooring fast. Therefore, timely faucet installation prevents costly repairs down the road. Because fixtures wear out over time, replacement is normal home care.
Modern faucets use less water than older models. As a result, upgrading saves money on monthly utility costs. New fixtures improve the look of your kitchen or bath. Since style and function go together, a fresh faucet makes daily tasks easier.
Kitchen Faucet Installation Services
Kitchen faucets get heavy daily use in every home. They turn on and off dozens of times each day. Consequently, the connections underneath face constant stress. Our crew removes old faucets and installs new ones cleanly.
Removing the Old Fixture
The hardest part is usually getting the old faucet out. Corroded nuts and seized supply lines make removal tough. However, we use basin wrenches and penetrating oil to free parts. We inspect supply lines during removal for wear.
If your home still has original braided lines, we replace them. Supply lines last about eight to twelve years on average. After that, a failed line dumps gallons of water per minute. Therefore, proactive replacement protects your home from flooding.
Installing Your New Kitchen Faucet
New kitchen faucets come in single-hole and three-hole styles. We verify hole count and spacing before work begins. If you switch from three holes to one, we add a deck plate. Every connection gets new stainless steel supply lines.
We check all joints under full water pressure before finishing. As a result, you get confidence that nothing will drip. Pull-down sprayer faucets need clearance checks below the sink. We route hoses so they move freely without kinks.
Bathroom Faucet Installation Options
Bath faucets come in centerset and widespread styles. Therefore, the model you choose must match your sink holes. We install faucets on drop-in sinks, wall sinks, and vessel sinks. Vessel sinks require tall faucets with enough reach.
We replace the drain at the same time. Since pop-up parts wear out, a fresh one prevents clogs. Every bathroom faucet installation includes new supply lines and a leak test. We handle tub and shower fixtures behind the wall.
If you change brands, we open the wall to swap the valve body. We install pressure-balancing valves that meet current plumbing code for Utah homes. Because these valves prevent scalding, they keep your family safe.
Garbage Disposal and Fixture Connections
A garbage disposal grinds food waste so it passes through drain lines. Disposals last eight to fifteen years depending on use. When yours fails, we replace it quickly with minimal disruption. We carry adapters for both InSinkErator and Waste King systems.
If your sink lacks a disposal, install requires a new drain flange. We mount the ring and connect it to your pipes. We wire a power outlet for the unit.
We install units from half to one horsepower based on your needs. As a result, you get the right size for your home.
Shut-Off Valve and Water Heater Work
Every fixture should have its own shut-off valve. As a result, you can isolate one sink without cutting off the whole house. Older Salt Lake City homes often have gate valves that seize over time. Therefore, we install quarter-turn ball valves as upgrades.
Because ball valves have fewer moving parts, they last longer. A quarter turn gives a clear sign of open or closed. For copper pipes we use fittings and for PEX we use push-fit valves.
We also handle all plumbing for water heaters. This includes the cold inlet, hot outlet, and relief valve piping. Furthermore, Utah code requires a thermal expansion tank on closed systems. We mount tanks on the cold line with proper support.
What to Expect from Your Faucet Installation
Most faucet installation jobs take one to two hours to complete. Garbage disposal work runs about an hour on average. Shut-off valve swaps take thirty to forty-five minutes each. We bring standard fittings and adapters to handle surprises on site.
We test every connection under full pressure before we leave. Therefore, you know the work is solid from day one. We clean up the work area so your space is ready to use right away. Because we respect your home, we leave it better than we found it.
Schedule Your Faucet Installation Today
Contact Home Ready Group Construction for a free estimate on faucet installation. We serve homeowners across Salt Lake City, Park City, and the Wasatch Front. Because every home is different, we tailor our approach to your specific needs. Our work pairs well with toilet and vanity installation projects.
Call us today to get leak-free fixtures you can count on for years.
Kitchen and bath faucets, sinks, garbage disposals, shower valves and heads, hose bibs, and water filtration. Bring your own fixture or we source it, your call.
It does. Hard water scales up cartridges and aerators faster here. We can install fixtures rated for it and point you to filtration if buildup keeps coming back.
Yes. We isolate the water, make the connection, then pressure-test every joint before we pack up. No drips left behind.
Usually yes. If a shutoff or shower valve is seized, we replace it. If the fix opens up a wall, we show you the scope before cutting.
Have a question we did not cover here? Read our full FAQ.
Your project in Utah
Let’s discuss your project. We respond within 48 hours. Prefer to talk now? Call (385) 515-6688.